You are using an older less supported browser. Please let us know if you have any issues using this site
 Cart ( 00 )

PWR Rider Duo

Availability: Out of stock

US$89.95

PWR Rider Duo is a 450 lumen front  and a 12 lumen rear bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The front light outputs in an elliptical beam for broader, brighter road coverage while the rear light has a narrow bean for day and night visibility.

DOWNLOAD ModeMaker App

PWR Rider Duo is a 450 lumen front  and a 12 lumen rear bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The front light outputs in an elliptical beam for broader, brighter road coverage while the rear light has a narrow bean for day and night visibility.

DOWNLOAD ModeMaker App

Specifications

pwr rider duo run times

*NOTE*: Using RedCap will slightly reduce these runtimes, depending on its mode

LIGHT OUTPUT : 450 Lumens Front and 12 Lumens Rear
POWER BANK : 2200 mAh
DIMENSIONS : 122 x 30mm Ø
WEIGHT : 115g
FITS HANDLE BARS : 22.2mm - 31.8mm Ø
WHAT'S IN THE PACK : Light, RedCap, Helmet Mount, Silicone Strap, USB Cable, Hex Key

Features

The PWR Rider Duo comes with 7 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. It will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Using RedCap will slightly reduce these runtimes depending on its mode.

 PWR Charger light

Charge your devices

CHARGE YOUR DEVICES

Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. 


PROGRAM YOUR MODES

The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu.  You can do things such as control brightness, adjust runtimes and add new light modes.
DOWNLOAD MODEMAKER APP (BETA) >

Modemaker app

Instructions

FITTING YOUR NEW LIGHT TO YOUR BIKE :

QUICK VIEW INSTRUCTIONS

Place your light on the handle bar with “knog” logo on strap facing forward. There are two holes to choose from depending on your bar diameter. (You can rotate the light 90˚ to make it easier to hook the silicone strap on)

FITTING YOUR LIGHT TO THE HELMET MOUNT:

-Slide light onto the mount.

-Select preferred slot - furthest forward is best.

-Secure in slot with thumbscrew, turning anticlockwise.

USING THE BUTTON:

Your light comes with one button found on the bottom of the light near the lens, it provides many functions. To turn on press and hold the button until the light turns on. To turn off press and hold the button until the light switches off. To change modes once the light is on, a short press of the button changes modes

CHARGING YOUR LIGHTS:

PWR Commuter and PWR Rider use a micro USB input to charge. Find this under the end cap. Press RED button to release cap. You cannot charge the light through the larger USB type A port. This is for charging other devices with your PWR

 

DOWNLOAD PRODUCT INSTRUCTIONS
DOWNLOAD MODEMAKER APP (BETA)

Newsletter