You are using an older less supported browser. Please let us know if you have any issues using this site
 Cart ( 00 )

Blinder MOB Mr Chips

Availability: In stock

US$44.95

So called, because of the Chips On Board (COB) LED tech this light uses to give off its superior glow. Perfect for all traffic scenarios i.e. cars coming at you from the side, or to soften the glare from your mate’s rear end in the peloton. With its 120° beam and reflective faceplate, Mr Chips makes sure you are seen not just from the front & rear, but from the side too. This bright bike lights long runtimes and lumen output of 80 lumens at the front and 44 at the rear ensures you are well seen up to at least 1.2 Km’s away, all night long. And its secret weapon? 2x front & 3x rear interchangeable straps so you can swap these lights between bikes with different sized seatpost and handlebars – including aero seatposts and oversize bars.

* Required Fields

US$44.95

So called, because of the Chips On Board (COB) LED tech this light uses to give off its superior glow. Perfect for all traffic scenarios i.e. cars coming at you from the side, or to soften the glare from your mate’s rear end in the peloton. With its 120° beam and reflective faceplate, Mr Chips makes sure you are seen not just from the front & rear, but from the side too. This bright bike lights long runtimes and lumen output of 80 lumens at the front and 44 at the rear ensures you are well seen up to at least 1.2 Km’s away, all night long. And its secret weapon? 2x front & 3x rear interchangeable straps so you can swap these lights between bikes with different sized seatpost and handlebars – including aero seatposts and oversize bars.

Specifications

LIGHT OUTPUT : FRONT 80 lumens // REAR 44 lumens
DIMENSIONS : 42 x 42 x 62mm 
WEIGHT : 35g
RUNTIMES: 
mr chips burn times

Features

BEAM ANGLE : 120°

LIGHT MODES : Steady high, steady low, strobe, fancy flash, eco flash.

100% WATERPROOF : The Blinder MOB is IP67 Tested and 100% waterproof against all elements

BUTTON : Longer button push on (0.75sec) prevents accidental turn on. Short presses switch modes continuously. 

INTEGRATED USB PLUG : No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements

LEDs : Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode.

CHARGE TIME : 4 -5 hours (LED will turn green when fully charged)

BATTERY : USB Rechargeable Lithium Polymer

BIKE ATTACHMENT : Tool-less removable silicone straps for bars/posts 22 - 35mm+ diameter. Fits Aero & Oversize bars /posts.

ACCESSORIES INCLUDED : For front light 2x interchangeable straps for bars 22-27mm / 28-32mm+. For rear light 3x interchangeable straps for posts 22-32mm+ and Aero seatposts.

Instructions

STORAGE MODE:

QUICK VIEW INSTRUCTIONS

To activate storage mode make sure light is first turned off. Then hold down the on/off button for 5 seconds and release when red LED comes on. This LED will stay lit until the light drops into storage mode. 

To reactivate light, plug into USB port and charge as usual. Once charged light will turn on as before.

CHARGING:

When plugging the light into a USB port to charge a red LED will display on the on/off switch of the light to indicate that the light is charging. When fully charged this light will turn green to indicate charging is complete. 

DOWNLOAD PRODUCT INSTRUCTIONS

Newsletter